Description
- Description
PSS Shaft Seal 2" Shaft 3-1/4" Tube
Shaft Diameter: 2"
Stern Tube Diameter (D): 3-1/4" to 3-3/8"
Total Length (A): 9.175"
Total Length (compressed) (Compressed A): 8.175"
Rotor Diameter (B): 3.75"
Carbon Cuff Diameter (C): 3.25"
Stern Cuff Length (E): 2"
The PSS Shaft Seal is the number one selling marine mechanical seal
worldwide and is installed as standard equipment by many of the worlds most
reputable boat builders / yards. The PSS Shaft Seal is also recognized as
the premiere retrofit (aftermarket) seal on the world market. Certified by
Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages
and value of installing the PSS as it eliminates the maintenance, constant
adjustment & cost associated with traditional packing type glands. Aside
from these benefits, the PSS Shaft Seal helps to eliminate water in the
bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal
can be easily retrofitted and is available for shafts ranging from 3/4"
(20mm) to 6" (150mm).
The PSS Shaft Seal is a mechanical face seal that is created between
the flat surfaces of the rotating stainless steel rotor and the stationary
carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft
in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This
compression (pre-load) maintains contact between the faces and allows the
PSS to compensate for the thrust from the propeller. The carbon flange is
bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The
stainless steel collar is sealed to the shaft by two o-rings that are
recessed into the bore of the collar. These o-rings rotate with the shaft
and stainless steel rotor and do not experience wear during operation.
**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration.
PYI suggests as preventative maintenance that the PSS bellow be replaced in
six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
Brochure (pdf)
Refund Policy
Return Policy – Marine Tech Supplies
Effective Date: January 9, 2026
At Marine Tech Supplies, we want you to be satisfied with your purchase. Please review our return policy below.
-
Return Window
All return requests must be made within 14 days of the delivery date.
-
Return Eligibility
To be eligible for a return:
-
Item must be unused and in original condition
-
Item must be in original packaging
-
All accessories, manuals, and parts must be included
-
Proof of purchase is required
Items that are damaged due to misuse, installation error, or negligence are not eligible for return.
-
Non-Returnable Items
The following items cannot be returned:
-
Special order or custom products
-
Clearance or final sale items
-
Installed or used items
-
Electrical components once opened
-
Items returned without approval
-
Return Authorization (RMA Required)
All returns require a Return Authorization (RMA).
Returns sent without approval will be rejected.
To request an RMA, contact via About section
-
Return Shipping
-
Customer is responsible for return shipping costs unless the error was ours
-
Items must be shipped with tracking and insurance
-
We are not responsible for lost or damaged return shipments
-
Restocking Fee
A 15% restocking fee may apply to all approved returns.
Shipping charges are non-refundable.
-
Refund Process
-
Refunds are issued after inspection and approval
-
Refunds are processed back to the original payment method
-
Allow 5–10 business days for refunds to appear after approval
-
Damaged or Incorrect Items
If your item arrives damaged or incorrect:
-
Report within 48 hours of delivery
-
Provide photos and order details
-
We will arrange a replacement or refund at no cost
-
Refused Deliveries
Refused shipments are treated as returns and may be subject to:
-
Return shipping fees
-
Original shipping fees
-
Restocking fee
-
Chargebacks
Initiating a chargeback without contacting us first may result in denial of future service.
-
Policy Updates
Marine Tech Supplies reserves the right to update this policy at any time without notice.
